(3) the combination of glass canopy and stainless steel sunshade makes use of the characteristic that stainless steel is a poor conductor of heat, and takes away the solar radiant heat through the air flow caused by hot pressure and wind pressure between the two, so that the canopy system can play a role of heat insulation. make the building more energy-efficient.
(2) adjustable shading facilities should be used in ultra-low energy consumption buildings. The heat absorbed by the sun absorbed by the external sunshade surface can be adjusted automatically or manually according to the sun height angle and outdoor weather conditions, and the proportion of the sun absorbed by the external sunshade surface is smaller than that of the inner or middle shade. It is the most suitable shading form for ultra-low energy consumption buildings. The schematic diagram of the adjustable external sunshade and adjustable sunshade of the lifting louver is shown in figure 10.
The interior has changed obviously, the central control panel has a flat layout, the long air-conditioning button panel is integrated in the lower frame of the central air-conditioning tuyere, and the horizontal bar decoration in front of the co-driver is intended to create a horizontal stretch of the new interior. The dashboard and multimedia system are integrated sunshade design, but the low-configuration version is a traditional mechanical instrument + simple multimedia system playback control panel, while the high-configuration version is expected to be equipped with a large-size dual LCD screen. In addition, electronic handbrake and automatic parking system are only available in medium and high positioning automatic models, while manual models are only equipped with mechanical lever handbrake, which is intended to ensure a lower price threshold.
Do a good job in repairing and consolidating the damaged greenhouse of Dendrobium candidum. First of all, repair the damaged greenhouse film and close the greenhouse film to prevent cold air from entering the greenhouse. Generally adopt the form of “greenhouse + middle shed + small shed” or “greenhouse + sunshade + middle shed” to carry on the greenhouse multi-layer covering heat preservation treatment. Then reinforce the Dendrobium candidum greenhouse. Along the longitudinal axis of the large (medium) shed, a support such as bamboo is used to support and strengthen the roof every 2-3 meters, so as to improve the compression resistance of the shed and prevent the shed from falling under snow pressure. If there is external shading equipment on the scaffolding, the shading net on the external shading should be tightened to prevent damage caused by snow pressure. Special snow sweeps should be provided.
At present, spray-free plastics have been successfully used in side skirts, central control panels, DVD panels, glove boxes, sunshades, instrument panels and other automotive parts in the automotive field. Bioplastics bioplastics are produced by using original plants as raw materials, such as sugar cane and corn, under the action of microorganisms. Commonly used plastics generally use petroleum products, and there are often small molecular harmful substances that do not fully react, while bioplastics, due to the use of low-toxic and low-harm renewable raw materials, greatly reduce the VOCs volatilization in the car after turning it into automobile interior parts. In addition, this bioplastic can be used for subsequent use, and is a more environmentally friendly type of plastic.
Textile materials suitable for ultrasonic processing: which materials are suitable for ultrasonic processing, including synthetic fibers, such as nylon, polyester, polypropylene, some polyethylene, modified acrylic resin, some vinyl compounds, carbamate compounds, film, coated paper, etc. It also includes synthetic fibers mixed with 35-50% non-synthetic fiber components. Such as: speakers, dashboards, folders, lamps, vacuum cleaners, filters, electric mosquito rackets and so on. Double-head ultrasonic plastic welding machine, can give full play to its welding effect when welding hard plastic materials, ultrasonic welding machine, special scope: used for car body plastic parts, car doors, car instruments, headlamps, mirrors, sunshades, interior decoration, filters, plastic electronic products: prepaid water meters, electricity meters, communication equipment, cordless phones, mobile phone accessories.
Automobile interior decoration and supplies: dashboard, auxiliary dashboard, seat, door guard panel, internal cover, steering wheel, floor mat, floor glue, suitcase. Coat rack, sunshade panel, storage box, ashtray, gear, central control, automotive electronic system, safety information display system, interior lighting system, interior acoustic system, interior modification, vehicle sealing technology products, interior accessories, car carpets, safety seats, seat covers, headrests, handle covers, handboxes, anti-theft locks, seat belts, sunscreens and decorative products, surface coverings, curtains, sunshade products, etc.
1. The structure of the window should be able to control sunlight exposure and limit the area ratio of the window wall. For buildings with larger window area, endothermic glass, heat reflection glass or shading measures should be considered, such as sunshade panels, eaves, eaves, balconies, blinds, curtains and so on. Natural air can be directly used as a source of energy when the outdoor temperature is low, so the structure of the window should be able to open or set a natural vent on it.
The construction of greenhouse mainly adopts frame structure, which has high bearing capacity and long service life, and generally has the functions of heat preservation, ventilation, sunshade, insect prevention and so on. The span of the greenhouse is generally 7 ~ 9 meters, the shoulder height is 3 ~ 4 meters, and the top height is 5 ~ 6 meters. Because of the high structural strength, it can be built either as a single building or as a multi-building. The structure of the ordinary greenhouse is relatively simple, and the installation can be carried out according to the operating instructions. Before planting in the greenhouse, we need to do a series of work, such as the construction of the greenhouse, the consideration of the planting time of vegetables, the purchase of vegetable seeds in the greenhouse, and so on. In fact, if we want to make the income of planting in the greenhouse better, we also need to do some meticulous work on the fertility, diseases, pests and other factors in the field.
High temperature and humidity: high temperature and humidity in summer and autumn are also factors that affect the normal work of car stereos. The car is in the upper part of the dashboard, in order to avoid sunlight, the use of sunshade can achieve better results. Timely release of static electricity: more attention should be paid to the use of car stereo in winter, because the climate is dry in winter, turning on warm air in the car will cause drier, which is prone to static electricity.