The glass curtain wall can affect the radiation of the sun by selecting a reasonable glass material, but the effect of installing sunshade panels, shading blinds and other external shading is far greater than changing the glass material. Setting up a sunshade system on the glass curtain wall can minimize the direct exposure of sunlight, so as to avoid indoor overheating, which is one of the main measures to build and protect against heat in hot areas.
When installing the rubber soft joint, the screw of the bolt should protrude the outside of the joint and tighten the bolts on the end face of each flange repeatedly and uniformly according to the method of diagonal pressure to prevent pressure deviation. Tighten the threaded joint evenly using a standard wrench. Do not use an afterburner to slide, slide or break the movable joint. In addition, it should be checked regularly to avoid loosening and causing the disc to fall off or seep. After the rubber soft joint is under pressure for the first time (such as installation, pressure testing) or before it is put back into use after long-term shutdown, it should be re-pressurized and tightened bolts before it can be put into use. When using or storing rubber flexible joints, high temperature, ozone, oil and acid-base environments should be avoided. Sunny outdoor or windward pipes should be set up sunshade. Sun, rain and wind erosion are strictly prohibited. It is forbidden to brush paint and wrap thermal insulation materials on the surface of rubber soft joints. Due to the aging of rubber products, it should be inspected and replaced in time. Return to Sohu to see more
Although the solar greenhouse has a very good thermal insulation performance, but from the point of view of safety, heating equipment is still an important factor. The southern part of our country generally does not need to heat up, but if we encounter bad weather continuously, we still need to use the energy stored in the greenhouse itself, otherwise it will not be able to meet the growth of vegetables. Therefore, whether in the south or north, heating equipment has always been a necessary protective measure. The technical aspect requires that in the equipment configuration of solar greenhouse, the configuration of thermal insulation equipment should be demonstrated in great detail. Of course, the work of Guangdong solar panel greenhouse needs the cooperation of a variety of equipment, with the increasing temperature requirements, especially in autumn and winter production, external sunshade system, internal thermal insulation system and window opener and fan, wet curtain and other equipment need to be applied. For more information about how much the Guangdong sunboard greenhouse is, please contact Minghao greenhouse Engineering and Construction Company directly.
E: the body welding is promoted and then transferred to the third line of interior decoration to continue to complete the assembly, install front shock absorber, rear shock absorber, ceiling, sunshade, dashboard crossbeam, data acquisition terminal, dashboard assembly, combination instrument, sundries box, dashboard bezel, sub-dashboard, A-pillar trim panel. After completing the routine inspection from the quality door, turn to the fourth line of interior decoration.
The dashboard does not use sunshades with high microtubule technology with antireflective coatings. The dashboard display does not need a visor to protect the instrument from light. Interior design has a high degree of freedom.